Size:	31/2"x 7" x2" (60 mm x 180 mm x50 mm)
Weight:	3 lbs (1.36 kg) approx.
Construction:	Aluminum
Voltage output:	Min. 100v
Energy output:	2.0 joules per line (50 cap)
Power source:	Permanent magnet generator
Galvanometer and line check:	Max. voltage and current 3v 0.03 milli amps.

• Compact
• Instant discharge of capacitor when crank handle is removed
• Line indicator
• Built-in "galvanometer"
• Water and impact resistant
• High power, sturdy and reliable
• Temperature plus 50 degrees Celsius, minus 45 degrees Celsius
• Carrying case

Operating Instructions

1. Connect blasting cap to galvanometer posts, green light will indicate live blasting cap.
2. Hook up firing lines to line connectors. Red button- positive. Blue button- common, negative.
3. Crank generator handle. Green light beside line selector button will indicate live firing line. Continue to crank until red light appears.
4. You are now ready for initiating.
5. Fire line (1) or (2). Unfired line discharge capacitor remains fully charged. By cranking the generator handle you will verify if remaining line(s) is operating and capacitor is charged. Fire (second) line (if applicable). Capacitors do not bleed automatically.
6. By removing handle, capacitors will internally dump charge in approx. 10 seconds. Handle will unscrew when it is "jerked" counter-clockwise.

Maintenance

1. Occasional lubrication of threaded portion of generator handle facilitates rotation and removal.
2. To change galvanometer batteries, remove battery cover (back of machine) and replace. Check polarity of batteries. Seal cover with light silicone grease. Batteries recommended: Silver oxide 392 or equivalent.

In view of our policy to continually improve our products, Proparms Limited, reserves the right to alter the product(s) described herein without notice.