Microtracs units can be operated individually or as multiple units. Each unit is individually power and can be easily fitted to a variety of equipment platforms to suit a wide range of applications including video inspection, pipe examination, duct inspection, cleaning and more. Complete systems are available with power supply, controller and tether cable.  Low Maintenance Precision machined and incorporating high quality components, each Microtrac unit is fitted with a sealed, geared drivetrain and is capable of submerged operation to a depth of 100 ft /30 m. Microtracs can be fabricated from brass, aluminum, and stainless steel. High Performance Operating on 24 VDC, each Microtrac unit draws less than 2 amps at maximum load. A pair of these miniature units can easily carry in excess of 20 lbs / 8 kg, pull up to 300 ft / 90 m of tether cable and operate at speeds up to 30 ft / 10.5 m per minute. Deep lug, rubber track belts provide optimal traction on wet or slippery surfaces. Compact Size By design, Microtracs units are small and rugged, providing the user with access to confined spaces and harsh environments. When operated in pairs the Microtrac units are easily steerable, even in piping and ductwork. In a tripod assembly (Vertical Crawler) the Microtracs can travel vertically in 8 to 12 in (20 to 30 cm) diameter pipe.

æ

Depth Rating:		100 ft / 30 m
Speed:		0 - 30+ft / 9+ m per minute
Pull Rating:		12 lbs / 5 kg per track
Dimensions:		2.25 in H x 2 in W x 7 in L  (6 cm H x 5 cm W x 17 cm L)
Weight:		Aluminum - 3 lbs / 1.5 kg ea  Brass / Stainless - 5 lbs / 2 kg ea
Operating Voltage:		24 VDC
Current:		0.5 to 1.5 A (nom.)
Operating Temp:		0 - 50°C / 32 - 122°F

æ æ æ æ

Back to top

info@internationalindustries.net